Auto Surround
Sometimes the broadcaster transmits special signals for Surround Sound encoded programmes. The TV automatically switches to the best surround sound mode when Auto Surround is switched On.
Set/Change code
The Child lock feature (see TV, Features, p. 11) allows you to lock channels to prevent others from watching certain programmes.To watch locked channels, a
&Select Set/Change code.
Important:You have forgotten your code !
&Select Change code in the General menu and press OK.
éPress the cursor right and enter the overriding code
“Press the cursor again and enter a new personal
éIf no code exists yet, the menu item is set to Set code.
If a code has previously been entered, the menu item is set to Change code. Follow the instructions on screen.
Source
Source
Setup
EXT1
EXT2
EXT3
SIDE
&Press the cursor right to enter the list of types of peripherals attached to the selected input.
éSelect the peripheral device with the cursor up/down.
This menu allows you to indicate the peripheral you connected to one of the external inputs.
Once you have selected the source type, e.g. DVD, this source will automatically be selected when your remote control is in DVD mode, see p. 4, and when you press the v key on the remote control.
Decoder
Decoder
Setup 
Programme
Status
If a decoder or a descrambler is connected, see p. 15, you can define one or more programme numbers as decoder programme numbers.
&Select Decoder with the cursor right.
éSelect Programme.
“Select the programme number under which you have stored the programme coming from your decoder.
‘Select Status.
•Select the input used to connect your decoder: None, EXT1 or EXT2.
•Select None if you do not want the selected programme number being activated as a decoder programme number.
Note: Select EXT2 when the decoder is connected to your EasyLink video recorder.
8
