Philips 28-32PW9509 To select connected equipment, Cinema Link surround receiver, Recorder or DVD with EasyLink

16
Press the vkey on the remote control repeatedly to select EXT1,EXT2,EXT3 or SIDE according
to where you connected your equipment at the back or the right side of your TV.
Remark : Most equipment (decoder,recorder) carries out the switching itself, when it is switched on.
To select connected equipment
See the separate supplied Cinema Link instruction manual.
Attention: the sound info on screen will not correspond with the actual sound reproduction.
Cinema Link surround receiver
Recorder or DVD with EasyLink
The recorder (VCR or DVD+RW) or DVD can
be operated with the remote control via the
Recorder or DVD menu on screen.
&Press the MENU key on the remote control.
éSelect the Recorder or DVD menu with the
cursor up/down.
“Press the cursor left/right,up/down to select
one of the recorder or DVD functions.
The key ®for recording can be operated in the TV
mode.
If your EasyLink recorder has the system standby
function, when you press the Bkey for 3 seconds,
both TV and the recorder are switched to standby.
Òp‡π † ® Ï
Rwd Play Stop Play Ffw Rec Eject
Recorder
Òp ‡ π † Ï
Prev. Play Stop Play Next Eject
DVD
&Connect the audio cables to the AUDIO input
of your amplifier and to AUDIO L and Rat the
back of your TV.
éThe output level is controlled by the volume
control of the amplifier.
Note: Switch off the TV and your audio amplifier
before connecting them. Set the audio amplifier’s
volume to minimum.
AUDIO
Stereo amplifier and two extra front speakers
2285.1 gb 21-01-2004 08:27 Pagina 16