
Troubleshooting
No Video | No signal indicator | |
is displayed. | ||
|
Low Quality DVD | Picture not crisp | |
and some color | ||
playback | ||
distortion | ||
|
No sound | See video but no | |
audio | ||
|
●Check Video Input Selection
❍Composite: Yellow colored RCA jack
❍
❍Component: Typically 3 RCA jacks of Green, Red and Blue.
●Make sure you did not plug the video cable to video output port behind the LCD monitor TV.
●Check DVD connection
❍Composite gives good picture
❍
❍Component gives best picture
●Check if the LCD Monitor TV volume is turn off of muted.
●Connect the audio cable securely.
●Audio cable is connected incorrectly.
●Verify that the audio source is selected correctly in the OSD.
Remote Control Problems
Remote control does | No response from | ● Point the remote control directly at the remote |
not work properly | the LCD Monitor | sensor on the LCD Monitor TV. |
| TV when remote | ● Replace both batteries with new ones. |
| is pressed | ● Make sure the remote control is not disabled |
|
| (for disable/enable the remote control, please |
|
| refer to the section of Remote Control). |
Product Specific Problems
Screen image is too | Image is centered |
small | on screen, but |
| does not fill entire |
| viewing area |
●Perform the LCD Monitor TV factory reset (via Menu
file:///D/My%20Documents/dfu/300WN5/english/300wn5/SAFETY/saf_troub.htm (5 of