25
REMOTE USE - CODE ENTRY FOR ACCESSORIES
If your remote control will not operate your accessory

devices, look up the four-digit code listed by your

brand on panels 27-29.

Please read through steps 1-5 before beginning.

1
Place the TV/VCR/ACC Mode Switch in the proper
position.
2
Press the VCR • RECORD button on the remote
control and release.
3
Press the AUTO SOUND button on the remote with
in 30 seconds, then release.
4
Enter the FOUR-DIGIT REMOTE CODE
NUMBER for your desired device. The remote is now
ready to send commands to the unit.
5
Point the remote at the Device. Press the POWER
button on the remote to turn the unit ON.
If this doesn’t work the first time, repeat the steps using another
remote code number.
VOL
1
3
2
5
4
VCR
Cable Box
DBS or other Accessory Device