Philips 32HF7445 Preparation, Choosing a Master TV, Programming the Wireless Smart-Loader

Wireless Smart Loader

The Philips Wireless Smart-Loader 22AV1120/00 and 22AV1135/00 are installation tools especially designed for easy and fast installation of Philips Institutional TV’s.

Preparation

iMake sure that the 3 R6/AA sized batteries are placed correctly in the battery compartment of the Wireless Smart-Loader. Turn the power switch on at the left side of the product. A green LED at the top casing should light up when pressing any button indicating operational batteries. When the LED light is red, it indicates that the batteries need to be replaced.

The installation procedure consists of three steps:

1.Choosing the master TV

2.Programming the Wireless Smart-Loader

3.Installing a TV with the Wireless Smart-Loader

>Step 3 can be repeated on as many TV sets as required.

1. Choosing a Master TV

The master TV is the TV whose installation set-up has to be copied into other TV’s of the same type.

2. Programming the Wireless Smart-Loader

This step has to be done only once or the program of the Wireless Smart-Loader would be overwritten.

Point the Wireless Smart-Loader to the TV’s infra red receiver (distance around 5 to 30cm). Press the “MENU” Key on the Wireless Smart-Loader.

TV shows the following menu:

SMARTLOADER TO TV >

TV TO SMARTLOADER >

o Highlight “TV TO SMARTLOADER”

o Press the right cursor key on the Wireless Smart-Loader for wireless method or on the TV Remote Control for wired method.

>A number display shows from 1~100 the percentage of memory storage progress from the TV to the Wireless Smart-Loader (100 = fully loaded).

TV TO SMARTLOADER -------- ##

>When the data transfer is completed, ## is “100”, the following menu appears for 3 seconds:

SMARTLOADER READY >

>Now the Wireless Smart-Loader is programmed and can be used to install other TV sets.

3. Installing a TV with the Wireless Smart-Loader

Use a Wireless Smart-Loader programmed with the settings from a master TV of the same type.

Turn on the TV and point the Wireless Smart-Loader to the TV’s infra red receiver (max. distance around 30cm).

---- Press the “MENU” Key on the Wireless Smart-Loader.

o Highlight “SMARTLOADER TO TV”

o Press the right arrow key on the Wireless Smart-Loader for wireless method.

16