46
Cannot remove ‘e-sticker’ banner displayed on
the TV.
To remove the logos and images , set the
location of your T V to home.
1. Press .
2. Select [Setup] > [TV settings] >
[Preferences] > [Location].
3. Select [Home] and press OK.

TV channel issues

Previously installed channels do not appear in
the channel list:
Check that the correct channel list is
selected.
No digital channels were found during the
installation:
Check that the TV supports DVB-T, DVB-
T Lite or DVB- C in your country.
Some channels are not automatically installed
on my TV:
During inst allation, make sure tha t
you select the cou ntry where you are
installing t he TV.
9 Troubleshooting
This section describes commonly encountered
issues and accompanying solutions.

General TV issues

The TV does not switch on:
Disconnect the p ower cable from the
power outlet. Wai t for one minute then
reconnect it.
Check that the power cable is securely
connected.
The remote control is not working properly:
Check that the remote control batteries
are correc tly inserted accor ding to the
+/- orientation.
Replace the rem ote control batteri es if
Y,*><*>YJ<*> }
Clean the remo te control and TV sensor
lens.
The standby light on the TV blinks red:
Disconnect the p ower cable from the
power outlet. Wai t until the TV cools
down before recon necting the power
cable. If the bl inking reoccurs, con tact
Philips Consume r Care.
You forgot the code to unlock the TV lock
feature
Enter ‘8888’.
The TV menu is in the wrong language.
Change the TV me nu to your preferred
language.
When turning the TV on/off/to standby, you
hear a creaking sound from the TV chassis:
No action is required. The creaking sound
is normal expa nsion and contracti on of
the TV as it coo ls down and warms up.
This does not impac t performance.
EN
Downloaded From TV-Manual.com Manuals