33
Access CAM services
1 Insert an d activate the CAM (see ‘I nsert
and activate a C AM’ on page 38).
2 Press OPTIONS.
3 Select [Common interface].
»Applications provided by the digital TV
service operator are displayed.
Note
This menu opti on is available only if t he CAM
is inserte d and activated cor rectly.
Rearrange channels
After you install channels, you can rearrange the
order in which they appear.
1 While you watch T V, press FIND.
»The channel matrix menu is displayed.
2 Press OPTIONS.
»The channel options menu appears.
3 Select [Reorder], then press OK.
4 Select the cha nnel to rearrange , then
press OK.
»The selected channel is highlighted.
5 Move the highlighte d channel to its new
location, the n press OK.
6 Press OPTIONS.
7 Select [Done reordering], then press
OK.
Test digital reception
You can check the quality and signal strength
of digital channels. This allows you to reposition
and test your antenna or satellite dish.
1 Press .
2 Select [Setup] > [Channel settings]
> [Channel installation] > [Digital:
Reception test] , then press OK.
3 Enter the freq uency to test, then pr ess
OK.
4 Select [Search], then press OK.
5 When the channe l is found, select
[Store], then press OK.
Note
If the signal qu ality and stre ngth is poor,
repositio n the aerial or satel lite dish and retes t.
If you still have problems with the reception
of your digital b roadcast, cont act a specialised
installer.
English
EN
Downloaded From TV-Manual.com Manuals