315 2163.1 (16X24)
Sound menu
Sound
TV
Volume
Equalizer Headphone volume Surround mode (Dual
AVL
Delta volume
Smart sound
Press the cursor right to select Sound.
Select the menu items in the Sound menu with the cursor up/down and adjust the settings with the cursor left/right.
Remember, control settings are at normal
Note:
-Dual X is only available with dual sound transmission.
-Mono/Stereo is only selectable in case of analogue stereo transmission.
-Nicam/Analogue is only selectable in case of Nicam transmission.
-Surround modes can not be modified when a headphone has been connected.
Surround Modes
Dependent on the sound signal broadcasted, select one of the Surround modes.
Stereo
This mode reproduces only the left and right front sound signals.
You only hear a stereo sound if the broadcast which you are receiving is transmitted in stereo or nicam stereo.
Dolby 3 Stereo
Hall
The special sound signal is distributed over the rear
loudspeakers which
creates a hall effect from
the rear.
The centre loudspeaker does not reproduce any signal.
This mode is recommended when you wish to add surround sound to a broadcast which is not encoded Dolby Surround or to a mono signal.
Pro Logic
(optimal with Dolby Surround broadcasting)
The sound signal is now distributed over the front left, the front right and the centre TV loudspeakers.
The rear loudspeakers do not produce any signal.
3D Surround
(optimal with Dolby Surround broadcasting)
3D Surround enables you to experience the effect of
Dolby Surround Pro Logic*
without the need of having
rear speakers connected or activated. The graphical
representation of the rear loudspeakers is replaced by the symbol ®r.
Select the level of 3D effect with the cursor left/right.
(with Dolby Surround broadcasting)
In addition to the left and right internal speakers, the
centre and the rear
surround loudspeakers
reproduce the Dolby Surround Pro Logic sounds.
This sound is always present in the movie or programme marked with G Dolby Surround.This mode is especially recommended for such programmes or movies.Dolby Pro Logic signals are also present on some DVD tracks. Note: Normal stereo broadcast is not always encoded to produce a rear surround sound.
Pro Logic and Hall can only be reproduced if Surround speakers is set to Yes in the Setup, Speaker menu, p. 11, and rear speakers are connected.
