315 2163.1 (16X24)
With two extra front loudspeakers connected
To enhance the sound reproduction of your TV you may connect two extra front loudspeakers via an external amplifier. See Connect Peripheral Equipment, Extra loudspeakers/Amplifier, p. 23.
In the Surround modes + ext. amp is added to indicate that you should switch on your amplifier as in these modes the internal TV speakers produce only centre sound. The subwoofer speaker is muted.
Note: If extra front speakers are connected and selected, all internal TV speakers produce centre sound in the surround modes Pro Logic*, Dolby 3 Stereo and 3D Surround.
*
‘Dolby’ ‘Pro Logic’ and the
Features menu
Features
TV
Channel list |
|
|
Subtitle |
|
|
Sleeptimer | Lock |
|
Child lock | Custom lock | Channel lock |
On timer | Unlock |
|
Press the cursor right to select Features.
Select the menu items in the Features menu with the cursor up/down and adjust the settings with the cursor left/right.
Use the
Channel list
Press the OK key to switch over to the selected TV channel or external.
Select subtitles
Switch on teletext and select the proper subtitle page from the index.
Switch off teletext.Now the subtitle page is stored for the selected TV channel.
Once subtitles have been stored and Subtitle On has been selected they will automatically be displayed on the selected TV channels if subtitles are in the transmission.
A symbol will indicate that the mode is on. Select On during mute when you want to have the subtitles automatically displayed when the sound has been muted with the ¬ key on the remote control.
Child lock
&Select Child lock with the cursor down.
éPress the cursor right to enter the Child lock menu.You’re summoned to enter your code. Enter the access code.
Note:You have to
Important:You have forgotten your code !
•Select Cancel with the cursor down.
•Select Set/Change code in the Setup menu. See General menu, Set/Change code, p. 11.
•Press OK.
•Press the cursor right and enter the overriding code
•Press the cursor again and enter a new personal
Note: The overriding code only works in the Set/Change code menu.
“Select one of the menu items of the child lock menu.
•Select Lock if you want to lock all channels and externals.
•Select Custom lock and press the cursor right. Select Channel lock if you want to lock the programmes from a certain TV channel or external.
•Select Unlock to unlock all locked channels and externals at once.