Connecting the TV to the internet using an Ethernet cable

Connecting a digital home theater amplifier using a digital

 

 

 

 

 

 

 

 

 

audio coaxial cable

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

LANWAN

1 2 3 4 5

hub or

broadband router

Ethernet cable

internet

LAN

 

telecommunications

Ethernet cable

 

equipment (modem, etc.)

 

Note

Please purchase shielded Ethernet cables at your local store and use them when you

OUT

Note

DIGITAL AUDIO

IN

digital home theater amplifier

connect to network equipment.

After connecting an Ethernet cable, set up necessary network settings. (For the

network setup, refer to ‘Network’ on page 29.)

Do not insert any cable other than an Ethernet cable to the Ethernet port to avoid

damaging the unit.

If your telecommunications equipment (modem, etc.) does not have broadband router

functions, connect a broadband router.

If your telecommunications equipment (modem, etc.) has broadband router functions

but there is no vacant port, use a hub.

For a broadband router, use a router which supports 10BASE-T / 100BASE-TX.

Do not connect your PC directly to the Ethernet port of this unit.

Connecting the TV to the internet using a wireless LAN

Wireless LAN Access Point(AP) (e.g. wireless router)

WAN

internet

LAN

 

network equipment

 

(modem, etc.)

Ethernet cable

 

Note

After you made the wireless connection, set up necessary network settings. (For the network setup, refer to ‘Network’ on page 29.)

Use a Wireless LAN Access Point (AP) (e.g. wireless router) which supports IEEE 802.11 b/g/n. (n is recommended for stable operation of the wireless network.)

This unit does not support Ad-hoc mode.

Other radio devices or obstacles may cause interference to the wireless network connection.

Due to Copyright restrictions, the broadcaster may choose to mute PCM audio over Digital Audio Output for certain channels, shows or segments during the broadcast.

40EN

Page 41
Image 41
Philips 55PFL5706, 40PFL5706, 46PFL5706 Connecting the TV to the internet using an Ethernet cable, Audio coaxial cable