2005 HF Series User’s Manual | 112505.0959 |
Basic Television Connection
Antenna Connection
• Connect the antenna or RF cable signal to the
Mains Connection
• Verify that the mains voltage and frequency are correct. Please refer to the product labeling and documentation. Note: The power button on the front panel does not disconnect the television from the AC mains; it toggles the TV’s power mode between on and standby. To completely remove AC mains power, you must unplug the AC mains plug.
Switching on the Set
• Press the power button on the TV’s front panel or on the remote control to switch on the set.
Note 1: If the TV is in commercial mode, it might not respond to the front panel or the remote control, depending upon the TV’s mode and setup configuration. Please refer to the section TV Installation and TV Setup Menu in this documentation for more information.
Note 2: See Mains Connection, above.
4