Philips 32HFL3331/97 Preset the picture format, Preset the power mode, Use Smart power, Set ID

Preset the picture format

1	Enter the PBS setup menu.
2	Press	to select [Switch On
3	Settings] > [Picture Format].
	Press	to select one of the available
4	picture formats.
	Press	to return to the previous screen.

Preset the power mode

1 Enter the PBS setup menu.

2 Press to select [Switch On Settings] > [Power On]. Select the power mode that is used when the TV is switched on from the mains:

	• [Standby] (Standby): The TV is
	switched on in standby mode.
	• [On] (On): The TV is switched on.
	• [Last Status] (Last status): The TV is
	switched on to the last used power
3	mode.
	Press to return to the previous screen.

Use Smart power

Smart power enables you to display picture

with significant power savings without
compromising the picture quality.
1	Enter the PBS setup menu.
2	Press	to select [Switch On
	Settings] > [Smart Power]. Select one of
	the following options:
	• [Off] (Off): Disables Smart Power.
	• [Low] (Low): Displays the picture
	with least power savings.
	• [Medium] (Medium): Displays the
	picture with medium power savings.
	• [High] (High): Displays the picture
3	with maximum power savings.
	Press	to return to the previous screen.

Display a welcome message

1	Enter the PBS setup menu.
2	Press	to select [Switch On Settings]
	> [Display Msg]. Select one of the following
	options:
	• [Off] (Off): Disables the display of a
	welcome message.
	• [On] (On): Enables the display of a welcome
	message for a pre-defined period of time
3	(see ‘Set a welcome message’ on page 8).
	Press	to return to the previous screen.

Set a welcome message

1 Enter the PBS setup menu.

2 Press to select [Switch On Settings] > [Welcome Msg]. Select one of the following to set or clear a welcome message:

•	[Line 1] (Line 1): Press	to enter the
	first line of the welcome message.
•	[Line 2] (Line 2): Press	to enter the

	second line of the welcome message.
	• [Clear] (Clear): Clears the welcome
	message.
	• [Msg Timeout] (Message timeout): Set the
3	display time to 20, 25 or 30 seconds.
	Press to return to the previous screen.

Tip

•• You can have a maximum of 20 alphanumeric characters in each line of your welcome message.

Set ID

1 Enter the PBS setup menu.

2 Press to select [Switch On Settings] > [Set ID].

3 Press to adjust the ID to a number between 0 - 63.

4 Press to return to the previous screen.

Note

•• Available only in public signage applications.

8EN