Philips 42HFL3381/93, 32HFL3331/97 Preset the switch-on volume, Preset the maximum volume

2 Press to select [Switch On Settings] (Switch on setting). Select one of the following options:

• [Switch On Vol] (Switch on volume): Presets the volume.

• [Max Volume] (Maximum volume): Presets the maximum volume that a guest can select.

• [Switch On Ch] (Switch on channel): Presets the channel that is displayed when the TV is switched on.

• [Picture Format] (Picture format): Presets the picture format.

• [Power On] (Power on): Presets the power mode.

• [Smart Power] (Smart power): Presets the power savings mode.

• [Display Msg] (Display message): Enables or disables the display of a welcome message.

• [Welcome Msg] (Welcome message): Specifies a welcome message.

• [Set ID] (Set ID): Specifies an ID for signage applications. This option appears only if you select [Application] > [Signage] from the PBS setup menu.

PBS Mode

Application Consumer Setup

Switch On Settings

Control Settings

Blank Channel

Pay-tv Setup Multi RC Smart RC Store

USB to TV TV to USB Reset

Switch On Vol

Max Volume

Switch On Ch

Picture Format Power On Smart Power Display Msg Welcome Msg Set ID

Configure the settings for switch-on

You can configure settings (such as volume, channel, picture format, etc) that are used as default, when the TV is switched on.

1 Enter the PBS setup menu.

PBS Menu

Preset the switch-on volume

1	Enter the PBS setup menu.
2	Press	to select [Switch On
	Settings] > [Switch On Vol]. Select one
	of the following options:
	• [Last Status] (Last status): Select
	[Off] (Off) to switch the TV on at
	a user defined volume. Select [On]
	(On) to switch the TV on at the last
	volume setting.
	• [User Defined] (User defined): Press
		to set the volume that is used
3	when the TV is switched on.
	Press	to return to the previous screen.
Preset the maximum volume
1	Enter the PBS setup menu.
2	Press	to select and enter [Switch
3	On Settings] > [Max Volume].
	Press	to set the maximum volume
4	that a guest can select.
	Press	to return to the previous screen.

Preset the switch-on channel

1	Enter the PBS setup menu.
2	Press	to select [Switch On
	Settings] > [Switch On Ch]. Select one
	of the following options:
	• [Last Status] (Last status): Select
	[Off] (Off) to switch the TV on at
	a user defined channel. Select [On]
	(On) to switch the TV on at the last
	viewed channel.
	• [User Defined] (User defined):
	Press	to set the channel that is
	displayed when the TV is switched
3	on.
	Press to return to the previous screen.

E n g l i s h

EN 7