![](/images/new-backgrounds/1244694/24469423x1.webp)
Settings/Setup
Preferences | Menu preferences |
Picture/sound preferences | OSD |
Features preferences | Programme title |
Menu preferences | Set/Change code |
Factory settings |
|
Info
Menu preferences
OSD
&Select OSD.
éPress the cursor right to select Normal or Minimum.
Normal to activate the continuous display of the channel number (for 10 minutes) and extended display of TV channel and programme information on screen. E.g. information on the main or auxiliary programme, input signal quality of connected peripheral equipment, the display format and sound mode.
Minimum to activate the display of reduced channel information. See Use of the remote control, p. 4, i Display information.
Programme title
&Select Programme title.
éPress the cursor right to select Programme title Yes or No.
When selected Yes, after the selection of a TV programme or after pressing the i key on the remote control, a TV channel may transmit the name of the TV channel or the programme title.
When selected No, the programme title will only appear after pressing the i key and not after the selection of a TV channel.
Set/Change code
&Select Set or Change code in the Features preferences menu with the cursor down.
éIf no
If a
All number combinations from 0000 tot 9999 are valid numbers.
“The Features preferences menu reappears with a message confirming that the PIN has been created.
Important:You have forgotten your code !
&Select Change code in the Features preferences menu and press OK.
éPress the cursor right and enter the overriding code
“Press the cursor again and enter a new personal
Factory settings
This function allows you to reset most of the picture and sound settings to their predefined factory states.
&Select Factory settings with the cursor down.
éPress the cursor right.
“Press the OK key to erase settings and reset them to their default values.
12