6 Install channels
The rst time you setup yourTV, you are prompted to select a menu language and to installTV and digital radio channels (if available). This chapter provides instructions on how to
Select TV tuner
1Press MENU.
2Select [Setup] > [Installation] > [Channel install.] > [Tuner mode]
3Press
to select the source of TV broadcast, then press OK to con rm the selection.
4Press 
to return to previous menu.
Note
•If you are not sure what TV source to use, select [Auto].
Automatically install channels
This section describes how to search and store channels automatically.
1Press MENU.
2Select [Setup] > [Installation] > [Channel install.] > [Channel assistant].
3Press OK.
4Follow the
18EN
Manually install channels
This section describes how to search and store analogTV channels manually.
Select your system
Note
•Skip this step if your system settings are correct.
1Press MENU.
2Press 
to select [Setup] > [Installation] > [Channel install.] >
[Manual install].
» The [Manual install] menu appears.
3Press 
to select [Color system], then press 
to enter.
4Select your system, then press OK to con rm.
5Repeat the previous steps for [Sound system].
6Press MENU to exit.
Fine tune analog channels
1Press MENU.
2Press 
to select [Setup] > [Installation] > [Channel install.] >
[Manual install].
» The [Manual install] menu appears.
3Press 
to select 
to enter.
4Press 
to adjust frequency.
5Press OK to con rm.
6Press MENU to exit.
Downloaded From
