Philips 42PFL7432D/37 Connect to the TV, Connect the mains, Via a cable box or Satellite box

Models: 42PFL7432D/37

1 40
Download 40 pages 57.8 Kb
Page 7
Image 7

_________________________

2.1.3 Connect to the TV

Your Philips Digital TV will allow you to enjoy digital programs directly from your cable or off air.

Connect directly to the TV or connect via your current cable box or Satellite Receiver box.

_________________________

2.1.3.1Directly to the TV (you will not be able to receive pay channels)

Connect the cable TV signal or the incoming antenna signal to the ANTENNA x 75jack at the bottom of the TV.

you can also watch the unscrambled programs by simply tuning to the desired channel.You must first use Autoprogram, however, to store channels in the TV’s memory. See Chapter 7.3.

This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

_________________________

2.1.4 Connect the mains

)Verify that the power supply voltage corresponds to the voltage printed on the sticker at the back of the TV. Contact your local

dealer if your power supply is different.

)Ensure the power cord is fully inserted in the TV mains socket and the wall socket.

ENGLISH

ANTENNA

®See Chapter 7.3 Store TV channels for details on using Autoprogram to store channels in the TV’s memory.

ç- Broadcasters are in the middle of a transition from analog to digital TV.This means that a given broadcaster will have two channels on the air, one analog and one digital.

-This connection will supply stereo sound to the TV if it is being broadcast by the station you are watching.

_________________________

2.1.3.2 Via a cable box or Satellite box

Maintain the connection of the TV cable of your home into your cable box (or satellite receiver box).

®Connect your Cable box (or satellite receiver box) to the back of

VIDEO

L AUDIO R

AV 2

ANTENNA

 

AV2

L + R + VIDEO

CABLE

SIGNAL

SPLITTER

OUT

RF IN

Set top box

the TV using the best connection options. See Chapter 11.2 To make audio and video connections.

ÒSelect the source using the SELECT/INPUT button on the remote control.

Press the OK button to confirm your selection.

àFor more information, please refer to your cable box (or satellite receiver box) manual.

çWatching Cable TV programs that don’t require the cable box

Since you’ve connected the cable TV signal directly to the TV’s tuner,

MAINS

_________________________

2.1.5 Remote control

Insert the 2 batteries supplied (Type R03-1,5V).

Be sure the (+) and (-) ends of the batteries line up correctly (inside of case is marked.)

5

Page 7
Image 7
Philips 42PFL7432D/37 warranty Connect to the TV, Connect the mains, Via a cable box or Satellite box, Remote control