EN 36
4 Set up your TV

Settings assistant

Use the settings assistant to guide you
through the picture and sound settings.
1. While you watch TV, press .
2. Select [Setup] > [Quick picture and
sound settings], then press OK.
3. Select [Start], then press OK.
4. Follow the onscreen instructions to
choose your preferred settings.

Picture and sound

More picture settings

1. Press .
2. Select [Setup] > [TV settings] >
[Picture], then press OK.
3. Select a setting to adjust:
• [Smart picture]: Access predefined
smart picture settings.
• [Reset]: Reset to default settings.
• [Contrast]: Adjust the intensity of the
bright areas, keeping dark areas
unchanged.
• [Brightness]: Adjust the intensity and
details of the dark areas.
• [Colour]: Adjust colour saturation.
• [Hue]: Compensate colour variations in
NTSC encoded transmissions.
• [Sharpness]: Adjust sharpness in the
image.
• [Noise reduction]: Filter and reduce
noise in the image.
• [Tint]: Adjust the colour balance in the
image.
• [Custom tint]: Customise tint setting.
• [Pixel Plus HD]/ [Pixel Precise HD]:
Access advanced settings, including
[HD Natural Motion], *[Perfect
Natural Motion], [100 Hz Clear LCD],
[Super resolution], [Dynamic
contrast], [Dynamic backlight], [MPEG
artefact reduction], [Colour
enhancement], [Gamma].
*Available on certain models only.
• [PC mode]: Allow picture settings to
be changed when a PC is connected to
the TV through HDMI.
If enabled, you can select [Picture
format] > [Unscaled] which provides
maximum detail for display of PC
content.
• [Light sensor]: Adjust settings
dynamically to match lighting conditions.
• [Picture format]: Change the picture
format.
• [Screen edges]: Change the picture
size.
• [Picture shift]: Adjust the position of
the picture. You cannot select this
setting if the selected picture format is
Auto zoom or Wide screen.

More sound settings

1. Press .
2. Select [Setup] > [TV settings] > [Sound],
then press OK.
3. Select a setting to adjust:
• [Smart sound]: Access predefined
smart sound settings.
• [Reset]: Reset to factory default
settings.
• [Bass]: Adjust the bass level.
• [Treble]: Adjust the treble level.
• [Surround]: Enable spatial sound.
• [Headphones volume]: Adjust
headphone volume.
• [Auto volume leveling]: Automatically
reduce sudden volume changes, for
example when switching channels.
• [Balance]: Adjust the balance of the left
and right speakers.