Preset and watch TV
The following is how to use the On/Off key ( ) on the TV remote control to turn on/ off the TV set. (Press the key Channel +/- in standby mode may power on the unit, its the same for the side panel and the remote control.
Power On/Off
1.While switching on the AC power supply, the red indicator lamp stands for standby mode, while the blue indicator lamp stands for power on.
2.If the TV set is in standby mode, press the On/Off key on the remote control to power on.
3.Pressing on the On/Off key on the remote control may enter standby mode again.
4.If you don't use the TV set for a long period, unplug the power cord of the TV set from the socket to save electric energy, because the TV set consumes electricity even in standby mode.
Auto Standby function
When there is no signal input to the TV set, in order to protect the unit and reduce power consumption, the TV set may switch to standby mode after 30 minutes if it is not in PC mode. (It will enter standby mode 30 seconds later if the PC has no signal.)
Selecting input signal for TV program
If the TV set is not in the TV mode, the following methods may be used to select TV program:
1. Press the signal source key on the remote control to pop out signal source menu on the TV screen (as shown in the right diagram).
Press the 
/
key to select the option TV, and then press > key or OK key to confi rm switching to TV input terminal. After such switching, the signal source selection menu disappears, and the information on the current signal source is displayed on the up
right corner of the screen. Repeatedly pressing this key may exit the signal source menu. If no other operations are made, the signal source menu will disappear in 5 seconds.
2.Pressing the CH+/- key or up/down 
/
key or number key may also return to TV mode.
How to select TV program
Selecting TV program
1. Selecting with number key directly
•Press the number key directly to select the desired number of channel.
2. Selecting with the CH+/- key
•Press CH+ key or up key to select the channel number in the increasing direction.
•Press CH- key or down key to select the channel number in the decreasing direction.
Selecting TV volume
Press the VOL+/- key or left/right key to adjust to the desired volume.
18
