Philips 7800 manual Quadpacer\ 30-second interval timer, Programmable Quadpacer timer series

10ENGLISH

	Quadpacer\ 30-second interval timer
	C ◗ Quadpacer makes sure that you brush all sections of your mouth
1	evenly and thoroughly.At 30-second intervals (at 30, 60 and

90 seconds in case of a 2-minute brushing cycle), you will hear a short beep and a pause in brushing action.This is your signal to move to the next section of your mouth.

3

Programmable Quadpacer timer (series 7800)

The Programmable Quadpacer timer offers you the option of customizing the Quadpacer performance in 1 of 3 ways:

◗You may opt to keep the factory default setting of a 2-minute brushing time with Quadpacer beeps activated.

◗You may choose to extend your brushing time to 2.5 minutes by adding an additional timing interval of 30 seconds.

◗You may choose a 2-minute brushing time, but with the Quadpacer beeps turned off.

To change the Quadpacer settings:

C

C

C

1Place the handle in the charger that is plugged into a live electrical outlet.

2Press the Dual Speed Control button briefly and note which LED lights up.

3Press and hold the Dual Speed Control button. Continue to hold the button while the LEDs slowly cycle through the timing interval setting options:

◗Green LED in position 4: Quadpacer active (factory default setting).

◗Green LED in top (5th) position: 2.5 minute setting - Quadpacer active with additional timing interval of 30 seconds.