Philips Dual Speed Control series 7800, Battery Charge Indicator, Charge Indicator series 7800

C

C

ENGLISH 11

◗Yellow LED in bottom (1st) position: no timing intervals set - Quadpacer not active.

4To program the desired setting, release the button when the LED corresponding to your choice lights up.

BNote: Selecting 2.5 minutes brushing time reduces the number of brushings available from a charged battery.

Dual Speed Control (series 7800, 7500)

The Dual Speed Control feature allows you to choose between 2 speed settings: Normal speed for optimum brushing performance, or Reduced speed when an even more gentle action is desired.

Each time you turn your Sonicare on, it will begin brushing at the Normal speed setting.To change the speed setting:

1From Normal to Reduced speed: press the Dual Speed Control button once during brushing.

2From Reduced to Normal speed: press the Dual Speed Control button a second time during brushing.

A distinctive two-tone beep indicates that the speed setting has been changed.

It is recommended that you brush at the Normal speed setting to maintain optimal results.

The Normal setting should be selected when Sonicare is used in clinical trials.

Battery Charge Indicator

C ◗ If the battery charge of your Sonicare is low, you will hear 3 beeps after you have brushed your teeth for 2 minutes and the charge indicator LED will blink yellow for 30 seconds.

A low charge indication signifies that 3 or fewer 2-minute brushings remain.

When not in use, keep your Sonicare in the charger to maintain a full battery charge.

Charge Indicator (series 7800, 7500)

◗When the handle is placed in the charger, the green charge

indicator LEDs will blink in a rising pattern as the battery charges. The number of blinking LEDs indicates the level to which the battery has been charged.

When the battery reaches full charge, the LEDs stop blinking and start