Before First Use

Charge the razor before you start using it
(see ‘Charging’). Make sure the razor is
switched off before you start charging it.
Important
Only use the power plug and/or charging
stand provided to charge the razor.
The charging plug transforms 100 – 240V AC
to less than 24V DC.

Charging

Battery performance is best if you recharge
only when the batteries are (almost)
completely empty.
Charging or recharging at temperatures below
40ºF or higher than 95ºF adversely affects
lifetime of batteries.
Continuously recharging or continuously using
as a corded razor will reduce life of batteries.
You may also shave using the cord provided.
This razor will not recharge while being used
corded.
Do not charge razor in a pouch.
Recharge only when the bottom light on the
display lights up red.
Do not charge/recharge or use razor corded
until fully dried.
ENGLISH 13ENGLISH12

To replace clock battery

C1Turn clock module counterclockwise (1)
and remove from stand (2).
C2Remove battery cover and then use a flat-
bladed screwdriver to lift out the battery.
C3Replace battery with 1.5V button cell
watch battery,placing rounded side of
battery into battery compartment,flat side
(+) facing out. Replace battery cover.
C4Replace clock module into stand (1) and
turn clockwise to secure in place (2).
12
1
2