14ENGLISH
Placing or removing razor from charging stand:
C ◗ Always place razor in stand in an upright position making sure charging contacts in bottom of stand fit into recess in bottom of razor.
C ◗ Always remove razor from stand by lifting straight up. Do not tilt razor.
◗ Do not leave the charging stand with the razor in it continuously plugged into outlet as it would reduce life of batteries. If storing razor in stand, remove the plug from outlet as soon as the razor is fully charged.
C 1 Connect cord directly to razor or place razor in charging stand and connect the small plug of cord to charging stand.
Connect the charging plug into any 100V to 240V AC outlet. Use only the charging plug provided.
As you charge razor, the bottom light on the display turns red. After approximately 3 minutes, it will then turn green and blink. As charging continues, more and more lights of the display meter will briefly blink green and light up to indicate what level of the batteries have been charged.
ENGLISH 15
◗An adaptor plug may be necessary for charging plug usage in some foreign countries. Use an attachment plug adaptor of the proper
configuration for the power outlet.
The charging plug will automatically convert to work on 100V to 240V AC systems.
2First time charging and recharging after
full 4 hours. A fully charged razor has a cordless shaving time of up to 30 days.
When batteries are fully charged, all the “lights” in the display will light up green. A few hours after charging, all lights go off.
Recharging
1First time charging requires 4 hours. After initial charge, recharging requires 1 hour.
Recharge only when the bottom light on the display lights up red.
C 2 When razor is fully charged, disconnect the charging plug from outlet.
Do not keep razor or charging stand permanently plugged into outlet. If using charging stand, always remove razor from stand by lifting straight up. Do not tilt razor.