Philips 9P6444C1 RED/BLUE Convergence, Select Convergence control, If there is RED or Blue color

PICTURE MENU CONTROLS (CONTINUED)

RED/BLUE CONVERGENCE

Convergence is the correct lining up of the red and blue

light paths on the TV screen. NOTE: If no color fringing (see Smart Help) shows, then no Convergence adjustments are necessary for your TV.

BEGIN

1Select CONVERGENCE control.

With PICTURE MENU (2 of 2) on screen, move the RED highlight

with the MENU (M) buttons. Then press the MENU button.

2 If there is RED or BLUE color

fringing on the White cross, press

MAIN MENU
PICTURE	SOUND
FEATURES	HELP
1ST TIME SETUP	EXIT

24

1	+	PLAY ▶		STATUS
CLEAR				LIGHT
REW		MENU
	−	M	+	FF
◀◀
				▶▶

			PAUSE II
	MUTE	STOP ■	SURF
1		INFO
	VOL		CH

PICTURE MENU
COLOR	TINT
BRIGHT	PICTURE
SHARP	CLEARVIEW
EXIT	MORE...

1 OF 2

PICTURE MENU

CONVERGENCE

the MENU button to continue.
3 Press the MENU	buttons

3

GUIDE

ON/OFF POS SWAP FREEZE

FLESH CORRECTION

to move the red or blue cross

directly over the white cross on the

TV screen.

The red or blue cross is properly adjusted when it is completely merged with the white cross. (No color appears around the edge of the white cross).

4Press the STATUS button to clear the screen when convergence adjustments are complete.

STOP

SMART HELP

		SIZE
2 TUNER PIP
A◀ ◀ B 1	2	3

TV/VCR 4 5 6

ENTER

SLEEP 7 8 9

SMART0

POWER VCR ACC TV

M O D E

		MORE...
EXIT
	2 OF 2

If there is RED or BLUE

fringe on the WHITE cross, use this adjustment to improve the picture.

2

Press "M" to Continue

- or -

Press "" to Return

Remember. Convergence has been set at the factory for best viewing, but if one or more of

the (red or blue) colors appear around the edges of objects (color fringing) follow the steps given in this section.

3

Use the keys to merge the

RED fringe into the WHITE

cross. Press "M" to Continue.

NOTE: Adjustments for “Multi-Point” on- screen color fringing can also be made as part

MULTI-POINT CONVERGENCE

of the TV’s Convergence control system. Follow the TV’s on-screen menu directions to select individual screen areas that can be readjusted and set for varying red/blue color fringing conditions. These multi-point settings can then be “Saved” to memory for the specific areas of the TV screen (or Factory Settings for convergence can be recalled and put back into place for use).

Use the keys to adjust

Press "M" to Adjust or Press "STATUS" to Continue

Press "M" to Save Press " " to Undo

Press " " to

recall Factory Settings

8