Philips AC4083 manual 20English, Air purification combined with air humidification, Water level

20English

Air purification combined with air humidification

When you set the appliance to air purification combined with air humidification, the appliance cleans the air and humidifies it at the same

time.

Note: Make sure the water bucket is filled with water when you want to use the air humidfication function (see chapter ‘Before first use’).

Setting the desired air humidity

You can set the desired humidity. When the humidity of the room reaches the desired level, the humidification function switches off automatically.

1 To set the desired air humidity, press the HUMIDITY SET button one or more times.

,, The corresponding HUMIDITY SET light goes on.

Note:When you have set the desired air humidity, you can also set the fan speed, SILENT mode, BOOST POWER mode or AUTO mode as described above.

Water level

-- The water level in the water bucket is visible through the water level window on the side of the appliance.

-- When there is not enough water in the water tank, the red REFILL WATER light flashes to indicate that you have to refill the water bucket.

Humidity indication

-- The appliance is equipped with a built-in humidity sensor.The current

humidity is shown by the CURRENT HUMIDITY lights.

Note:The accuracy of the humidity indication is approximately plus or minus 5%.

Note:The humidity sensor in the appliance is not a regular hygrometer. Therefore it may take some time for it to sense change in the humidity level and to indicate the actual ambient humidity level.