Philips AC4083 manual Let excess water drip off the humidification filter, Cleaning schedule

24English

2Clean the humidification filter gently with the cleaning brush supplied under a slowly running tap.

3 Put the humidification filter back into the water tank. Descaling to clean the humidification filter:

Descale the humidification filter when the first speed light (with the indication CLEAN 1/5 above it) flashes. 

Note: It is important to descale the humidifying filter to avoid scale build-up, which would seriously affect the humidifying performance.

1Remove the humidification filter from the water tank.

Note:You have to remove the water bucket first before you can remove the water tank.

2Mix white vinegar (5ml/100 ml acetic acid) with an equal amount of tap water in a container that is large enough to soak the humidification filter in.

Note: If there are white deposits (scale) on the filter, make sure the side with the white deposits is immersed in the water.

3

4

5

6

7

Let the humidification filter soak in the solution for 1 hour.

Discard the water-vinegar solution.

Rinse the humidification filter under the tap to rinse away vinegar residues. During rinsing, turn the humidification filter so that both the front and back sides are rinsed.

Let excess water drip off the humidification filter.

Put the humidification filter back into the water tank. See chapter ‘Preparing for use’, section ‘Preparing for humidification’.

Cleaning schedule
Frequency	Cleaning method
Every day	Rinse water bucket
	Rinse water tank
	Rinse water tank lid
	Rinse water softener
Every week	Rinse humidification filter
When the first speed light (with the indication	Clean pre-filter
CLEAN 1/5 above it) flashes (approx. once a
month)
	Descale humidification filter with vinegar-water
	mixture
Every 2 months	Clean air quality sensor and air humidity
	sensor with cotton swab
When necessary	Wipe surface of appliance with soft dry cloth