English 25
Filter replacement and reset procedure
Filter maintenance
When any of the filters has to be replaced, the speed light under the filter number concerned and the ‘REPLACE FILTER’ light start to flash.You then have to replace this filter.
To ensure that the filters are in optimal condition when the appliance
is operating, the appliance is equipped with a lock system. If you do not
replace filter 2, filters 3/4 and/or filters 5/6 for a period of time, the
appliance is locked. When the appliance is locked, it does not operate
and the speed light under the filter number concerned and the REPLACE FILTER light light up continuously.
Approximately 1 day before the appliance locks, it beeps every 30 minutes
to inform you that one of the filters needs to be replaced.
The time between the flashing lights and the appliance being locked depends on the usage of the appliance. Normally this period is about 2 weeks. In case of very frequent use, this period will be shorter. Therefore we advise you to make sure you obtain a new filter as soon as you see the lights flashing.
Filter replacement indication
Filter 2: Multi-care filter
Filters 3/4:Activated carbon filter and HEPA filter
FILTER light flash, you have to replace both filter 3 (activated carbon filter) and filter 4 (HEPA filter).
Filters 5/6: Humidification filter and water softener
REPLACE FILTER light flash, you have to replace both filter 5 (humidification filter) and filter 6 (water softener).