Maintenance | Clock / Radio |
|
|
MAINTENANCE |
| SETTING THE CLOCK |
English
–If you do not intend to use the clock radio for a long time, disconnect the set by removing the plug from the wall socket. The battery should also be removed to prevent danger of leakage which will damage your set.
–To clean your set from fingerprints, dust and dirt, use a clean and soft damp cloth or chamois leather. Do not use cleaning products which contain, benzene, thinner, etc. as these may harm the housing.
–Avoid exposing the clock radio to rain, dampness and extreme heat to prevent a safety hazard as well as damage to the set.
Environmental information
All unnecessary packaging material has been omitted. We have done our utmost to make the packaging easily separable into three mono- materials: cardboard (box), expandable polysyrene (buffer), polyethylene (bags, protective).
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packing materials, exhausted batteries and old equipment.
IMPORTANT NOTE FOR USERS IN THE U.K.: SEE PAGE 2
Clock display
The time is shown and the display also indicates whether you have switched on the alarm(s), and these indicators will light up respectively next to ALARM 1 and ALARM 2 on the display:
1.Press and hold down the TIME button.
2.Use the 4 and 7 buttons to set and adjust the hours and minutes.
–With 7 pressed, the time will increase rapidly from minutes to hours. Release 7 when you have reached the correct setting.
–Pressing 4 will allow you to adjust the time slowly back minute by minute if necessary.
RADIO
You can use this clock solely as a radio.
1.Set the RADIO switch to ON.
2.Select your wave band using the BAND switch.
3.Tune to desired radio station using the TUNING knob.
4.Set the volume by turning the VOLUME knob.
5.To turn off the radio, set the RADIO switch to OFF.
Antenna:
–For FM reception, use the
–For MW/LW reception, the set is provided with a
7
