English | Controls/ Power Supply |
Congratulations on your purchase and welcome to Philips!
To fully benefit from the support that Philips offers, register your product at www.philips.com/welcome.
Supplied accessories
– AC power cord
Top and front panels (See 1)
1FM STEREO indicator – lights up for stereo FM reception.
2Cassette recorder keys:
PAUSE ; – pauses playback or recording STOP•EJECT 9/
–stops playback or recording.
–opens the cassette holder.
F. FWD/REWIND 5 or 6
– fast winds/rewinds the tape
PLAY 1 – starts playback
RECORD 0 – starts recording
3VOLUME rotary – adjusts volume level
4p - 3.5mm stereo headphone jack
Helpful hints:
–Connecting the headphones will switch off the speakers.
5MIC
– for voice recording
6Band selector: MW, FM
– selects wavebands, MW or FM
7Source selector:TAPE, RADIO
–selects tape or radio source of sound
–switches off the set
8TUNING rotary – tunes to radio stations
Back panel (See 1)
9Telescopic antenna
-improves FM reception.
0AC INPUT - inlet for power cord
!Voltage selector – (inside the battery compartment, not for all versions) adjust to match the local voltage 110/220V before plugging in the set.
@Battery door - open to insert 6 X 1.5 batteries, type R20 or
Power supply
Whenever convenient, use the power cord if you want to conserve battery life. Make sure you remove the plug from the set and wall outlet before inserting batteries.
Batteries (not included)
•Insert 6 batteries, type R20 or
correct polarity. (See 1)
Batteries contain chemical substances, so they should be disposed of properly.
•Incorrect use of batteries can cause electrolyte leakage and will corrode the compartment or cause the batteries to burst:
•Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set.
•When inserting new batteries, do not try to mix old batteries with the new ones.
•Remove the batteries if the set is not to be used for a long time.
