Philips AT800, AT751 Dry shaving, Trimming AT940/AT893/AT891/AT890 only, Cleaning and maintenance

English 9

Dry shaving

1Press the on/off button once to switch on the shaver.

2Move the shaving heads in circular movements over your skin.

3After shaving, press the on/off button once to switch off the shaver.

4Clean the shaver (see chapter ‘Cleaning and maintenance’).

Trimming (AT940/AT893/AT891/AT890 only)

You can use the trimmer to groom your sideburns and moustache.

1Push the trimmer slide downwards to open the trimmer.

2Press the on/off button once to switch on the shaver.

,, You can now start trimming.

3After trimming, press the on/off button once to switch off the shaver.

4Clean the trimmer (see chapter ‘Cleaning and maintenance’).

5Close the trimmer (‘click’).

Cleaning and maintenance

Never use compressed air, scouring pads, abrasive cleaning agents or aggressive liquids such as petrol or acetone to clean the shaver and the charging stand (AT940 only).

Always unplug the shaver before you clean it under the tap.

-- Clean the shaver after every shave for optimal shaving performance. -- Regular cleaning guarantees better shaving performance.

-- For the best cleaning results, we advise you to use the Philips Cleaning

spray (HQ110).

-- Be careful with hot water. Always check if the water is not too hot, to prevent your hands from getting burnt.

Note:Water may leak from the socket at the bottom of the shaver when you rinse it.This is normal and not dangerous because all electronics are enclosed in a sealed power unit inside the shaver.