Philips AT754, AT751, AT800, AT700 manual Accessories, Shaving heads, Cleaning, Environment

14English

Accessories

To retain the top performance of your shaver, make sure you clean it regularly and replace its shaving heads at the recommended time.

Shaving heads

-- We advise you to replace your shaving heads every two years. Always replace with HQ9 Philips Shaving Heads (for AT940) or HQ8 Philips Shaving Heads (for AT893/AT891/AT890/AT754/AT753/AT752/AT751/ AT750).

Cleaning

-- Use Cleaning spray (HQ110) to clean the shaving heads thoroughly.

Environment

-- Do not throw away the appliance with the normal household waste at the end of their life, but hand them in at an official collection point for recycling. By doing this, you help to preserve the environment.

-- The built-in rechargeable shaver battery contains substances that may pollute the environment. Always remove the battery before you discard or hand in the shaver at an official collection point. Dispose of the battery at an official collection point for batteries. If you have trouble removing the battery, you can also take the appliance to a Philips service centre.The staff of this centre will remove the battery for you and will dispose of it in an environmentally safe way.

Removing the rechargeable shaver battery

Only remove the rechargeable battery when you discard the shaver. Make sure the rechargeable battery is completely empty when you remove it.

1Disconnect the shaver from the mains.

2Let the shaver run until it stops.

3Undo the screws in the back of the shaver and in the hair chamber.

4Remove the front panel and the back panel.

5Bend the 6 hooks aside and take out the power unit.

Be careful, the hooks are sharp.

6Remove the battery.

Be careful, the battery strips are sharp.