Cassette Recorder
Cassette playback
1Push the Source selector slider to TAPE
2Press STOP•OPEN 9/ to open the cassette holder and insert a cassette and close the deck.
3Press PLAY 1 to star t playback.
4To pause playback press PAUSE ;. To resume, press the key again.
5To stop the tape, press STOP•OPEN 9/.
Fast forwarding/rewinding
1Press F.FWD/REW 5 or 6 unti you reach your desired passage.
2Press 9/ to stop fast forwarding/rewinding.
Helpful hints:
–During playback, the keys are automatically released at the end of a tape and the set is switched off (unless PAUSE ; mode has been activated.)
–During fast forwarding/rewinding, the keys will not be released at the end of a tape. To switch off the set, make sure the cassette keys are also released.
Recording from the CD Player
1Select CD/MP3 source.
2Inser t a CD and if desired, program track numbers.
3Press 9/ to open the cassette holder. Inser t a blank tape and close the deck.
4Press REC 0 to star t recording.
5Press 2; to star t CD playback.
6For brief interruptions press PAUSE ;. To resume recording, press ; again.
7To stop recording, press 9/.
Recording from the Radio
1Select TUNER source.
2Tune to the desired radio station (see Radio reception).
3Follows steps 3, 4, 6,7 under Recording from the CD Player.
General information on recording
•Recording is permissible insofar as copyright or. other rights of third parties are not infringed.
•For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes.
•The best recording level is set automatically. Altering the VOLUME or DBB will not affect the recording.
•To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape.
The making of unauthorized copies of
