Philips AZ1037/37 Maintenance & safety see, CD player and CD handling Safety information

Models: AZ1037/37

1 15
Download 15 pages 21.35 Kb
Page 13
Image 13

Maintenance & safety (see 0)

CD player and CD handling Safety information

If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair.

The lens of the CD player should never be touched!

Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.

Always close the CD-tape door to avoid dust on the lens.

To clean the CD, wipe in a straight line from the center towards the edge using a soft, lint- free cloth. Do not use cleaning agents as they may damage the disc.

Never write on a CD or attach any stickers to it.

Tape deck maintenance

To ensure quality recording and playback of the tape deck, clean parts A, B and C as shown, once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck.

1Open the cassette holder by pressing 9/.

2Press 1 and clean the roller C.

3Press ; and clean the heads A, and the capstan B.

4After cleaning, press 9/.

Cleaning of the heads can also be done by playing a cleaning cassette through once.

Place the set on a flat, hard and stable surface so that the system does not tilt.

Do not expose the set, batteries, CDs to humidity, rain, sand or excessive heat caused by heating equipment or direct sunlight.

The apparatus shall not be exposed to dripping or splashing.

Adequate ventilation with a minimum gap of 15cm (6 inches) between the ventilation holes and surrounding surfaces is necessary to prevent heat build-up.

Do not cover the ventilation openings with items such as newspapers, table-cloths, curtains, etc.

No objects filled with liquids, such as vases, shall be placed on the apparatus.

No naked flame sources, such as lighted candles, should be placed on the apparatus.

The mechanical parts of the set contain self- lubricating bearings and must not be oiled or lubricated.

To clean the set, use a dry cloth. Do not use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the housing.

Page 13
Image 13
Philips AZ1037/37 quick start Maintenance & safety see, CD player and CD handling Safety information, Tape deck maintenance