Philips AZ2555/17 warranty Power Supply, Basic Functions

English CONTROL

POWER SUPPLY BASIC FUNCTIONS

SUPPLIED ACCESSORIES

–remote control

–USB cable

–video cable

–CD-ROM USB PC LINK installers

TOP AND FRONT PANEL (See 1)

1p - 3.5 mm stereo headphone jack.

Note: The speakers will be muted when headphones are connected to the set.

2VOLUME -adjust volume level or equalizer level

(BASS/ MID /HIGH)

3STANDBY ON y - switch the set on/ off.

4SOURCE - selects sound source for functions: CD/

TUNER/ USB PC LINK/ GAME •AUX

5IR SENSOR -infrared sensor for remote control

6 LCD Display - shows the status of the set

7 [dB]: - display to indicate bass power.

8 PRESET -,+ - selects a preset radio station.

SEARCH ∞ , §

CD: - searches backward or forward within a track;

-skips to the beginning of a current track/ previous/ later track.

USB PC LINK - skips to the beginning of a previous/ later track.

TUNER: - tunes to radio stations

2;- starts or pauses CD / USB PC LINK playback

9- stop CD / USB PC LINK playback; - erases a CD program.

MODE - selects different CD play modes: e.g. REPEAT or SHUFFLE order.

-shows current track name in USB PC LINK mode

9USB - connect the supplied USB cable here to the USB port of your computer

0GAMESOUND - select sound effects: BLAST/ PUNCH/ SPEED/ NORMAL in GAME •AUX mode WOOX - selects special bass enhancement on/ off EQUALIZER - selects bass, mid and treble frequencies, and volume BASS/ MID /HIGH/ VOL

PROG

CD: - programs tracks and reviews the programmed songs;

TUNER: - programs preset radio stations. FM•AM - selects FM / AM waveband

!AUDIO IN ( LEFT / RIGHT) - LINE-IN jack for external audio appliance.

VIDEO IN - to keep video plug in place

@OPEN•CLOSE – press to open/ close CD door

BACK PANEL (See 1)

#Telescopic antenna - improved FM reception $ Battery compartment - for 8 batteries, type

R-20, UM-1 or D-cells

% AC MAINS - inlet for power cord

^ VIDEO OUT- connect to the VIDEO IN jack on a TV or VCR for viewing or recording.

REMOTE CONTROL (See 1)

1CD - selects CD sound source

TUNER - selects tuner source / wavebands USB - selects USB PC LINK

AUX - selects GAME •AUX

2y -switches the set to standby / on if set operating on AC power. (Switches set off only if battery powered)

3REPEAT - repeat all tracks in USB PC LINK source or selects the repeat modes in CD source SHUFFLE - plays CD tracks in random order in CD / USB PC LINK source

MUTE - interrupts/ resumes sound

4VOL 4, 3 -- adjust volume level or adjust equalizer level (BASS/ MID /HIGH)

5¡ , ™ - select previous/ next track in CD / USB PC LINK playback

9 - stop CD / USB PC LINK playback;

-erases a CD program.

2; - starts or pauses CD or USB PC LINK playback

5/ 6 - searches backwards/ forwards within a CD track.

TUNER: - tunes to radio stations

6 EQUALIZER -- selects bass, mid and treble frequencies

WOOX -- select special bass enhancement on/ off GAMESOUND - select sound effects: BLAST/ PUNCH/ SPEED/ NORMAL in game mode

7 PRESET -,+, - selects a previous/ next radio preset station

CAUTION

Use of controls or adjustments or performance of procedures other than herein may result in hazardous radiation exposure or other unsafe operation.

POWER SUPPLY

Whenever convenient, use the power supply to conserve battery life. Make sure you remove the power cord from the set and wall jack before inserting batteries.

Batteries (not included) (See 1)

•Insert 8 batteries, type R-20, UM-1or D-cells, (preferably alkaline) with the correct polarity.

Remote control (See A)

•Insert 2 batteries, type AAA, R03 or UM4 (preferably alkaline).

Incorrect use of batteries can cause electrolyte leak- age and will corrode the compartment or cause the batteries to burst.

•Do not mix battery types: e.g. alkaline with carbon zinc. Only use batteries of the same type for the set.

•When inserting new batteries, do not try to mix old batteries with the new ones.

•Batteries contain chemical substances, so they should be disposed of properly.

Using AC Power

1.Check if the AC power supply, as shown on the type plate located on the bottom of the set, corresponds to your local power supply. If it does not, consult your dealer or service center.

2.If your set is equipped with a voltage selector, adjust the selector so that it matches with the local power supply.

3.Connect the power cord to the wall jack and the set is now ready for use.

4.To disconnect the power supply, unplug the set from the wall jack.

POWER-SAVING AUTOMATIC STANDBY

As a power-saving feature, the system automatically switches to standby 15 minutes after CD has reached the end and no control is operated.

The type plate is located on the bottom of the set.

BASIC FUNCTIONS

Switching on and off and selecting function

1.Press STANDBY ON y on the set to switch on.

2.Press SOURCE once or more to select your desired function: CD, TUNER, USB PC LINK or GAME•AUX .

3.Press STANDBY ON y to switch off the set.

Note : The tone, sound settings, tuner presets and the volume level (up to a maximum volume level of VOL 20 ) will be retained in the set's memory.

Adjusting volume and sound (See 2)

1.Adjust the volume with the VOLUME control.

= Display shows the volume level	and a
number from 0-32.

2.wOOx

To enhance the bass response: press wOOx once or more to switch on / off.

=wOOx-key backlight lights up when wOOx is turned on.

Notes:

-wOOx can be used when you play TUNER, CD, USB PC LINK and GAME•AUX source.

-To prevent sound interference the bass control options operate exclusively. You cannot combine the bass from EQUALIZER with wOOx

-Some discs might be recorded in high modulation, which causes a distortion at high volume. If this occurs, deactivate wOOx or reduce the volume.