SPEAKERS

OPERATION

REMOVABLE SPEAKERS

English

Attaching the speakers

Slide the speakers down into the sleeves on the sides of the cabinet. The speakers will click into position.

Taking off the speakers

Keep the levers (found on the back corners of the speaker) pressed and slide the speaker upward.

Connecting the speakers

1.Connect the right speaker to the terminal R, with the red wire to + and the black wire to –.

2.Clip the exposed portion of the wire into the corresponding color terminal.

3.Repeat the wiring procedure for the left speaker to terminal L, making sure that you connect the red wire to + and the black wire to –.

Positioning the speakers

The ideal position is obtained when the 2 front speakers and the listening position build an equilateral triangle and the speakers are at ear-height.

Note: Speakers with an impedance of 4 ohms or more may be used. Do not use speakers with a lower impedance, as this will damage your set.

 

SPEAKER

 

R

LL

++

++

UNLOCK

SPEAKER

MAINSI

~

+ R -

- L +

10 mm

 

LEFT

RIGHT

OPERATION

General operation

1.To switch on the set, choose the sound source by using the source selector 6.

2.Adjust the sound using the VOLUME 342, TONE 4 and DBB 1 controls.

3.To switch off the set, move the source selector 6 to TAPE/OFF position. Make sure the cassette keys are released.

VVOOLLUUMMEE

MODEE

DBB

DYYNAMICICBA

BOOSSTT SSSS

SEARCH

REMOTE

SENSOR

DI

TONE

9

Page 9
Image 9
Philips AZ2725 manual Removable Speakers, Operation