1. Set the source selector 6 to
2. Press STOP•OPEN 9 / 8/9
3.Insert a recorded cassette.
4.Press PLAY 2 8/9 and playback
5.Adjust the sound using the VOLUME 34 controls.
6.For brief interruptions, press PAUSE ; 8/
again to resume playback.
7. To rewind or fast forward the tape, press 5 or
8.To stop playback, press STOP•OPEN 9 / 8/9.
– The keys are automatically released at the end of the tape.
9.Set the source selector 6 to TAPE/OFF position (with the cassette keys released) to switch off the set.
Continuous playback
1.Set the source selector 6 to TAPE/OFF.
2.Press both STOP•OPEN 9 / 8/9 keys to open the cassette holders.
3.Insert a recorded cassette in both cassette holders.
4.Press PLAY 2 9 on deck 2 and playback will start on deck 2.
5.Press PAUSE ; 8 on deck 1 and then PLAY 2 8. As soon as playback on deck 2 stops (when the tape has reached its end or when STOP•OPEN 9 / 9 is pressed) PAUSE ; 8 on deck 1 is released and playback will start on deck 1.
RECORDRECORD
RECORD | PLAY |
|
SEARCH |
|
STOP•• |
|
OPEN | PAUSE |
|
English
General information on cassette recording
–Recording is permissible insofar as copyright or other rights of third parties are not infringed.
–Recording is only possible on deck 1. During recording it is advisable not to wind or rewind a tape in deck 2.
–This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes. For recording you should use NORMAL type cassettes (IEC I) on which the tabs have not been broken.
–The recording level is set automatically. Altering the VOLUME , DBB or TONE controls will not affect the recording in progress.
–No recording will take place during the first 7 seconds of a tape, when the leader tape passes the recorder heads.
–To prevent the accidental erasure of a recording, keep the cassette side
to be protected in front of you and break out the left tab. Recording on this side is no longer possible. To record again, cover the tabs with a piece of cellophane tape.
1
13