CASSETTE RECORDER | SAFETY AND MAINTENANCE |
SAFETY & MAINTENANCE INFORMATION (See 8)
•Don't expose the set, batteries, CDs or cassettes to humidity, rain, sand or excessive heat.
•Clean the set with a dry cloth. Don't use any cleaning agents containing alcohol, ammonia, benzene or abrasives as these may harm the set.
•Place the set on a hard and flat surface so that the system does not tilt. Make sure there is good ventilation to prevent the set overheating.
•The mechanical parts of the set contain
CD player and CD handling
•If the CD player cannot read CDs correctly, use a cleaning CD to clean the lens before taking the set to repair.
•The lens of the CD player should never be touched!
•Sudden changes in the surrounding temperature can cause condensation on the lens of your CD player. Playing a CD is then not possible. Do not attempt to clean the lens but leave the set in a warm environment until the moisture evaporates.
•Always close the
•To clean the CD, wipe in a straight line from the center towards the edge using a soft,
•Never write on a CD or attach any stickers to it.
Tape deck maintenance
To ensure quality recording and playback of the tape deck, clean parts A, B and Cas shown, once a month. Use a cotton bud slightly moistened with alcohol or a special head cleaning fluid to clean the deck.
1.Open the
2.Press PLAY 2 and clean the roller C.
3.Press PAUSE ; and clean the heads A, and the capstan B.
4.After cleaning, press STOP 9.
Environmental information
We have done our best to reduce the packaging and make it easy to separate into 3 materials: cardboard, expandable polystyrene, polyethylene.
Your set consists of materials which can be recycled if disassembled by a specialized company. Please observe the local regulations regarding the disposal of packaging, dead batteries and old equipment.
