CD PLAYER | CASSETTE RECORDER |
3.Repeat steps
ªDisplay: FULL if you try to program more than 20 tracks.
Reviewing the program
In the stop position, press and hold PROGRAM until the display shows all your stored track numbers in sequence.
Erasing a program
You can erase the program by:
•pressing 9 twice
ªCLr is displayed briefly and PROG disappears.
•You select TAPE or RADIO function.
CASSETTE RECORDER
Cassette playback
1.Adjust the POWER slider to TAPE.
2.Insert a cassette as shown and close the door.
3.Press 2 to start playback.
ªDisplay: shows tAPE throughout tape operation.
4.To pause playback press PAUSE ;. Press again to resume.
5.Press SEARCH 5 or 6 to fast wind the tape.
6.To stop the tape, press STOP 9.
The keys are automatically released at the end of a tape and the set switched off, except if PAUSE ; has been activated.
General information on recording
•Recording is permissible insofar as copyright or. other rights of third parties are not infringed.
•For recording, use only NORMAL type cassettes (IEC type I) on which the tabs have not yet been broken. This deck is not suited for recording on CHROME (IEC II) or METAL (IEC IV) type cassettes.
•The best recording level is set automatically. Altering the VOLUME or DBB controls will not affect the recording.
•To protect a tape from accidental erasure, break out the tabs. If you wish to record again, cover the tabs with a piece of adhesive tape.
CD Synchro Start Recording
1.Adjust the POWER slider to CD.
2.Insert a CD and if desired, program track numbers.
3.Insert a suitable tape into the cassette deck and close the door.
4.Press RECORD 0 to start recording.
–Playing of the CD program starts automatically from the beginning of the program. You don't need to start the CD player separately.
ªTo select and record a particular passage within a CD track:
•Press SEARCH ° or ¤. Release the control when you recognize the passage you want.
•To pause CD playback, press 2;.
•Recording starts from this exact point in the track when you press RECORD 0.
5.To pause recording, press PAUSE ;. Press PAUSE ; again to resume recording.
6.To stop recording, press STOP 9.
Recording from the Radio
1.Tune to the desired radio station (see Tuning to radio stations).
2.Follow steps
