Philips BDL425IV user manual Connecting to a DVD Player, Connect the LCD Monitor to a DVD Player

User Manual BDL4251V

Connecting to a DVD Player

As you finish the connection between the DVD player and the LCD monitor, you could display the contents from the played DVD on the LCD

monitor. You might like to refer to your DVD player’s manual for further information.

Connect the LCD Monitor to a DVD Player

•To achieve this, apply a 3x components cable (Y, Pb, Pr) with BNC connectors at one end and RCA connectors at the other end between DVD player and display. In case you can only obtain RCA connectors on both ends you can use the in box available BNC-to-RCA converters.

DVD player(Y, Pb, Pr Out) and LCD monitor (COMPONENT). You might need BNC-to-RCA adapters(including in the accessories) to convert

the BNC connectors to RCA connectors if you are using the separated signaling(Y, Pb, Pr) RCA cable.

•If your DVD player supports HDMI signaling, apply a HDMI to HDMI cable for the connection.

•The AUDIO IN 2 , 3 (both of RCA connector type) can be used for audio input. Select [AUDIO 1] ( for 3.5φ phone jack), [AUDIO 2], [AUDIO 3] Or [HDMI] from the AUDIO SOURCE button on the remote control. HDMI (for audio) is selectable only when HDMI or DVI-D (for video) is selected.

22

Downloaded From TV-Manual.com Manuals