Philips BDL3210Q, BDL4610Q Installing and Removing Table Stands optional, To install table stands

BDL3210Q / BDL4210Q / BDL4610Q

1.4.Installing and Removing Table Stands (optional)

To install table stands:

1.Ensure your display is powered off.

2.Spread a protective sheet on a flat surface.

3.Grab and face-down the display and place on the protective sheet..

4.After inserting the stand in the guide block, tighten the screws on both sides of the display. NOTE: The longer side of the stand should face the front of the display.

To remove table stands:

1.Power off the display.

2.Spread a protective sheet on a flat surface.

3.Grab and face-down the display and place on the protective sheet..

4.Remove screws using a screwdriver and place them in a safe place for reuse.

2