BDL3210Q / BDL4210Q / BDL4610Q

15

5. Input Mode

VGA Resolution:

BDL3210Q:

Standard
Resolution
Active Resolution Refresh Rate Pixel Rate Aspect Ratio Refers to
H Pixels V Lines
VGA 640 480 60 Hz 31.5 MHz 4:3 Video Graphic Arr ay
WVGA 720 400 70 Hz 31.3 MHz 16:9 Wide Video Graphic Array
SVGA 800 600 60 Hz 37.9 MHz 4:3 Super VGA
XGA 1024 768 60 Hz 48.3 MHz 4:3 Extended Graphic Array
WXGA 1360 768 60 Hz 47.7 MHz 16:9 Wide XGA

BDL4210Q/BDL4610Q:

Standard
Resolution
Active Resolution Refresh Rate Pixel Rate Aspect Ratio Refers to
H Pixels V Lines
VGA 640 480 60 Hz 31.5 MHz 4:3 Video Graphic Arr ay
WVGA 720 400 70 Hz 31.3 MHz 16:9 Wide Video Graphic Array
SVGA 800 600 60 Hz 37.9 MHz 4:3 Super VGA
XGA 1024 768 60 Hz 48.3 MHz 4:3 Extended Graphic Array
WXGA 1360 768 60 Hz 47.7 MHz 16:9 Wide XGA
SXGA+ 1440 900 60 Hz 55.9 MHz 16:10 Super Extended Graphics
Array
WSXGA+ 1680 1050 60 Hz 64.7 MHz 16:10 Wide Super Extended
Graphic Array
HD1080 1920 1080 60 Hz 67.5 MHz 16:9 HD 1080

SDTV Resolution:

Standard
Resolution
Active Resolution Refresh Rate Pixel Rate Aspect Ratio Refers to
H Pixels V Lines
480i 720 480 29.97 Hz 13.5 MHz 4:3 Modied NTSC Standard
480p 59.94 Hz 27 MHz
576i 720 480 25 Hz 13.5 MHz 4:3 Modied PAL Standard
576p 50 Hz 27 MHz

HDTV Resolution:

Standard
Resolution
Active Resolution Refresh Rate Pixel Rate Aspect Ratio Refers to
H Pixels V Lines
720p 1280 720 50 Hz 74.25 MHz 16:9 Nor mal DVB Mode
60 Hz
1080i 1920 1080 25 Hz 74.25 MHz 16:9 Normal ATSC Mode
30 Hz
1080p 1920 1080 50 Hz 148.5 MHz 16:9 Normal ATSC Mode
60 Hz
• For the BDL3210Q model ,the PC text quality is optimum in WXGA mode(1360x768,60Hz); for the BDL4210Q/BDL4610Q models, the PC text
quality is optimum in HD 1080 mode(1920x1080,60Hz).
• Your PC display screen might appear different depending on the manufacturer (and your particular version of Windows).
• Check your PC instruction book for information about connecting your PC to a display.
• If a vertical and horizontal frequency-select mode exists, select 60Hz (vertical) and 31.5KHz (horizontal). In some cases, abnormal signals (such as
stripes) might appear on the screen when the PC power is turned off (or if the PC is disconnected). If this happens, press [INPUT] to enter video
mode. Also, make sure that the PC is connected.
• Should horizontal synchronous signals seem irregular in RGB mode, check PC power saving mode or cable connections.
• The display settings table complies to the IBM/VESA standards, and are based on analog input.
• DVI support mode is regarded as the same as PC support mode.
• The best timing for the vertical frequency in each mode is 60Hz.