4 Change settings
This section helps you change the settings of this player.
1
2
3
Note
•• You cannot change a menu option that is grayed out.
•• To return to the previous menu, press 
.To exit the menu, press 
.
Picture
1 Press 
.
2 Select [Setup] > [Video] to access the video setup options.
•[TV display]: Select a picture display format to fit the TV screen.
•[HDMI video]: Select an HDMI video resolution.
•[HDMI Deep Color]: Display colors with more shades and hues when the video content is recorded in Deep Color and the TV supports this feature.
•[Picture settings]: Select a predefined color setting.
• [Watch 3D video]: Set to 3D or 2D |
|
output when playing a | li s h |
The player must be connected to a | |
3D TV through HDMI. | E n g |
Note
•• If you change a setting, make sure that the TV supports the new setting.
Sound
1 Press 
.
2 Select [Setup] > [Audio] to access the audio setup options.
•[Night mode]: Select quiet or full dynamic sound. Night mode decreases the volume of loud sound and increases the volume of soft sound (such as speech).
•[HDMI Audio]: Set an HDMI audio format when this player is connected through HDMI.
•[Digital Audio]: Select an audio format for the sound output when this player is connected through a digital connector (coaxial).
•[PCM Downsampling]: Set the sampling rate for PCM audio output when this player is connected through a digital connector (coaxial).
Note
•• Night mode is only available for Dolby encoded DVD and
Network (installation, status...)
1 Press 
.
EN 17
