Philips BDP3010 Off, Off, Off, PCM, Off, PCM, Audio, “On”:, “On”:, “Off”:, “Off”:, setting, Category, (coaxial), Bitstream, Night Mode, HDMI Audio, HDMI cable, Description

LIST OF SETTINGS

Category		Menus / Options	Description
Audio	Night Mode	On	Compresses the range between soft
		Off	and loud sounds.
			“On”:
			Activates the Night Mode.
			“Off”:
			Deactivates the Night Mode.
	Down Sampling	On	Sets the sampling rate for outputting
		Off	the PCM audio from the digital output
			(coaxial).
			“On”:
			Over 96 kHz PCM audio will be down
			sampled at 48 kHz.
			“Off”:
			For BD or DVD recorded in LPCM
			without copyright protection,
			2-channel audio signals up to 96 kHz
			are output as LPCM signals.
	Virtual Surround	On	Select “On” to enjoy the stereophonic
		Off	virtual space through your existing 2
			channel stereo system during
			playback of BD-video or DVD-video.
	Blu-ray Disc Audio	Mix Audio Output	“Mix Audio Output”:
Setup		Primary Audio Only	The audio for the secondary video and
			output together with the audio for the
			the interactive application will be
Advanced			primary video.
			“Primary Audio Only”:
			Only the audio for the primary video
			will be output.
			When playing back a BD-video which
			only contains the primary audio, the
			audio output will be the same case as
			the “Primary Audio Only” even if the
			“Blu-ray Disc Audio” is set to “Mix
			Audio Output”.
	HDMI Audio	HDMI Normal	Sets the audio format for the sound
	• This feature is	PCM	output from the HDMI OUT jack.
	available only when	Off
	the display device is
	connected by an
	HDMI cable.

•Refer to page 38 for more information.

Digital Out	Bitstream	Sets the audio format for the sound
• When HDMI cable is	PCM	output from the DIGITAL OUT
connected, make		(COAXIAL) jack.
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
• Refer to page 39 for
more information.

EN

Others Setup Function Playback Setup Basic Connections Introduction

EN 33