SETUPS
You can set connection speed as your preference. (The default setting is “Auto”.)
1)Follow steps 1) to 4) in “Connection Test” on page 41.
2)Use [K / L] to select “Enable(Custom)”, then press [OK].
3)Use [K / L] to select “Connection Speed”, then press [OK].4)Use [K / L] to select the desired setting, then press [OK].
“Auto”:Set the appropriate connection speed automatically, in accordance with your network environment.
“10BASE Half”:Set the connection speed to “10BASE Half”.“10BASE Full”:Set the connection speed to “10BASE Full”.“100BASE Half”:Set the connection speed to “100BASE Half”.“100BASE Full”:Set the connection speed to “100BASE Full”.5)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.
•Choose a connection speed in accordance with your network environment.•The network connection may be disabled depending on the device, when the settings are changed.
You can limit the Internet access from the
1)Follow steps 1) to 4) in “Connection Test” on page 41.
2)Use [K / L] to select “Enable(Custom)”, then press [OK].
3)Use [K / L] to select4)Use [K / L] to select the desired setting, then press [OK].
“Allow”:Internet access is permitted from allInternet access is permitted only for
5)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.
Network StatusYou can check the status of network settings.1)Follow steps 1) to 4) in “Connection Test” on page 41.
2)Use [K / L] to select “Enable(Custom)”, then press [OK].
3)Use [K / L] to select “Network Status”, then press [OK].•Network setting list will be displayed.•MAC address of this unit will be displayed in the list.4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.
Disable
|
| ||
home A“Settings” A | A“Others” AConnection” |
1)Follow steps 1) to 4) in “Connection Test” on page 41.
2)Use [K / L] to select “Disable”, then press [OK].3)Use [K / L] to select “Yes”, then press [OK].4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.
•The network connection can be reactivated by setting the network connection to “Enable(Easy)” or “Enable(Custom)”.