SETUPS

Software Upgrade

Disc Upgrade

home A“Settings” A“AdvancedSetup” A“Others” A“SoftwareUpgrade” AUpgrade”“Disc

You can upgrade the software by using disc.1)Follow steps 1) to 3) in “Connection Test” on page 41.2)Use [K / L] to select “Software Upgrade”, then press [OK].3)Use [K / L] to select “Disc Upgrade”, then press [OK].4)Use [K / L] to select “Yes”, then press [OK].5)Disc tray will open automatically.•Insert the disc for software upgrade and then press [A (open/close)].

6)After completing loading disc, confirmation message will appear. Use [s / B] to select “Yes” and press [OK] to start upgrading.

•It may take a while to complete the upgrading.

7)After the disc upgrade finishes, this unit will restart and open the disc tray automatically. Remove the disc.

Note

•Please visit www.philips.com/support to download the latest firmware version.•Please do not unplug the AC power cord while executing the “Disc Upgrade”.•All settings will remain the same even if you upgrade the firmware version.

 

Note

 

 

 

 

 

 

EN

 

• Please do not unplug the AC power cord or LAN

 

 

 

cable while executing the “Network Upgrade”.

 

 

 

 

• All settings will remain the same even if you upgrade

 

 

 

 

the software version.

 

 

 

 

• The disc tray will open automatically after upgrading

 

 

 

 

finishes. This is not a malfunction.

 

 

 

 

 

 

 

 

 

Reset to Factory Default

 

 

 

 

 

 

 

Initialize the setting, SD Memory Card or network setting.

 

1) Use [K / L] to select “Settings” in the home menu,

 

 

 

then press [OK].

Introduction

2) Use [K / L] to select “Factory Default”, then press

 

[OK].

 

3) Use [K / L] to select the desired setting, then press

 

 

[OK].

 

 

“Settings”:

 

 

All the settings except for the “Parental” and “Network

 

 

 

 

Connection” setting will be reset to default.

Connections

 

“Format SD Card” (Available only when an SD

 

Memory Card is inserted):

 

 

Initialize the SD Memory Card.

 

 

“Local Storage”:

 

 

Local storage for Player or SD card (Available only when

 

 

an SD Memory Card is inserted) used for BD-Java will be

 

 

initialized.

 

 

 

 

“Network Settings”:

Basic

 

Reset the network setting to the default.

 

 

4) Use [K / L] to select “Yes”, then press [OK].

 

 

• Confirmation message will appear. Press [OK] to

Setup

5) Press [BACK U] to go back to the previous screen,

 

complete the setting.

 

 

or press [ (home)] to go back to the home menu.

 

Network Upgrade

home A“Settings” A“AdvancedSetup” A“Others” A“SoftwareUpgrade” AUpgrade”“Network

You can upgrade the software by connecting the unit to the Internet.

1)Follow steps 1) to 3) in “Connection Test” on page 41.

2)Use [K / L] to select “Software Upgrade”, then press [OK].

3)Use [K / L] to select “Network Upgrade”, then press [OK].

4)Use [K / L] to select “Yes”, then press [OK].

•This unit will then start checking for the latest firmware version.5)Confirmation message will appear.Use [s / B] to select “Yes”, then press [OK].•The unit will start downloading the latest firmware version.

6)When the download completes, confirmation message will appear. Press [OK].

•The unit will start upgrading the firmware version.

•It may take a while to complete the upgrading.

7)After upgrading finishes, this unit will restart and open the disc tray automatically.

Note

•Do not remove the SD Memory Card while executing the “Format SD Card” or “Local Storage” (SD card). It will damage the card.

•“Format SD Card” and “Local Storage” (SD card) are not available when a Blu-ray Disc is in the unit.

Others Setup Function Playback

EN 45