SETUPS

EasyLink (HDMI CEC)

home A “Settings” A

“Advanced

A “Others” A

“EasyLink

 

Setup”

 

(HDMI CEC)”

EasyLink (HDMI CEC) function allows your TV (limited to PHILIPS brand EasyLink TV) to act in conjunction with this unit, or vice versa.

When “EasyLink (HDMI CEC)” setting is set to “On”, functions listed below will be available.

One Touch Play

When this unit is turned on, the TV also is turned on and the appropriate external input channel will be selected automatically. The appropriate external input channel can also be selected on your TV automatically when you press [B (play)], [S(previous)], [T(next)], [Number buttons], [ (home)], [INFO ],

[TOP MENU], or [DISC MENU / POP-UP MENU] when the unit’s power is on.Standby

When you press and hold [Q(standby-on)]for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit also.

System InformationGet & Set Menu Language

The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit. Refer to the “Player Menu” on page 31 for available languages.

•This feature is available only when “Auto” is selected in the “Player Menu” in the settings menu.

Network Connection

EN

 

Set up the network connection settings in order to use the BD-Live function with a BD-Live disc.

Connection Test

 

home A “Settings” A“Advanced

A“Others” A “Network

A“Connection

 

 

 

 

Setup”

 

Connection”

Test”

 

 

After you made IP address / DNS settings or when a LAN

 

 

cable is connected, always perform the connection test to

 

 

check if the connection is correctly made.

 

 

 

 

1) Use [K / L] to select “Settings” in the home menu,

 

 

 

Introduction

3) Use [K / L] to select “Others”, then press [OK].

 

 

then press [OK].

 

 

 

 

 

 

2) Use [K / L] to select “Advanced Setup”, then press

 

 

 

[OK].

 

 

 

 

 

 

4) Use [K / L] to select “Network Connection”, then

 

 

 

 

 

press [OK].

 

 

 

 

 

 

 

 

 

 

 

 

Connections

 

• “Testing...” : The test is in progress.

 

 

 

5) Use [K / L] to select “Connection Test”, then press

 

 

 

[OK].

 

 

 

 

 

 

Connection test will start automatically and the test result

 

 

will appear right after the connection test finishes.

 

 

 

• “Pass” : Connection test is successfully completed.

 

 

 

• “Fail” : Connection test failed. Check the connection

 

 

 

 

 

 

settings.

 

 

 

 

 

Basic

screen.

 

 

 

 

 

Press [OK] to go to the list of network status confirmation

 

 

 

 

 

 

 

 

 

 

Setup

 

 

IP Address

 

xxx.xxx.xxx.xxx

 

 

 

 

Subnet Mask

 

xxx.xxx.xxx.xxx

 

 

 

 

 

 

Default Gateway

 

xxx.xxx.xxx.xxx

 

 

 

 

 

 

Primary DNS

 

xxx.xxx.xxx.xxx

 

 

 

 

 

 

 

 

 

 

 

 

 

Secondary DNS

 

xxx.xxx.xxx.xxx

 

 

 

 

 

 

 

 

then press 'OK'.

 

 

 

Playback

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

6) Press [OK] to go back to the previous screen, or

 

 

 

press [ (home)] to go back to the home menu.

 

 

 

 

 

 

 

 

 

 

 

 

Note

 

 

 

 

 

Function

 

• If the connection test passes, you can enjoy the

 

 

 

 

 

BD-Live functions using the Internet without making

 

 

 

any extra settings.

 

 

 

 

 

Setup

 

• If the connection test fails, you may need to change

 

 

 

 

 

the MAC address settings of your router. You can

 

 

 

check the MAC address of this unit on “Network

 

 

 

 

 

 

Status” screen (refer to page 44).

 

 

 

 

 

 

 

 

Others

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

EN 41