Front Panel
EN
1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 10 | ||||||||||
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
1.Q(standby/on) button
•Press to turn on the unit, or to turn the unit into the standby mode. (To completely turn off the unit, you must unplug the AC power cord.)
•Press and hold for 10 seconds to shut down the unit.
•This button lights up in red when the unit is in standby mode and turns off when the power is on.
•Touch to stop playback.
•Touch to pause playback.
•Touch to start or resume playback.
5.A (open/close) button
•Touch to open or close the disc tray.
6.Disc tray
•Place a disc after opening the disc tray.
7.LED light
•Lights up in blue when the power is on and “Ambient Light Control” is set to “On”. (Refer to page 50.)
8.Display
•Refer to “Front Panel Display” on page 14.
9.Infrared sensor window
•Receive signals from your remote control so that you can control the unit from a distance.
10.SD card slot
•Insert an SD Memory Card and play back the contents in it.
Connections Introduction
Rear Panel
1 | 2 | 3 | 4 | 5 |
Setup Basic
| L | Y | PR/CR |
LAN |
|
| PB/CB |
HDMI OUT |
|
| |
|
|
| |
Wireless LAN | R |
|
|
COAXIAL AUDIO | VIDEO | COMPONENT | |
| OUT | OUT | VIDEO OUT |
6 | 7 | 8 |
1.LAN terminal
•Use to connect a modem with LAN cable.
2.HDMI OUT jack
•Use to connect to a display with an HDMI compatible port with an HDMI cable.
3.AUDIO OUT jacks
•Use to connect a TV monitor, an AV receiver / amplifier or other device with an RCA audio cable.
4.COMPONENT VIDEO OUT jacks
•Use to connect a TV monitor with component video inputs with an RCA component video cable.
5.AC power cord
•Connect to a standard AC outlet to supply power to this unit.
•Unplug this cord from the AC outlet to completely turn off the unit.
6.Wireless LAN terminal
•Use to connect the supplied USB wireless LAN adapter.
FL | C | SL | SBL |
FR | SW | SR | SBR |
7.1 ch AUDIO OUT
9
7.DIGITAL OUT (COAXIAL) jack
•Use to connect an AV receiver / amplifier, Dolby Digital / DTS decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable.
8.VIDEO OUT jack
•Use to connect a TV monitor, an AV receiver / amplifier or other device with an RCA video cable.
9.7.1ch AUDIO OUT jacks
•Use to connect to an AV receiver / amplifier with 7.1ch audio cable.
•Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit.
•This unit does not have the RF modulator.
•Do not insert a USB flash memory to the Wireless LAN terminal. This unit is not designed to play back data in USB flash memory.
Others Setup Function Playback
EN 11