SETUPS

EasyLink (HDMI CEC)

home A “Settings” A

“Advanced

A “Others” A

“EasyLink

 

Setup”

 

(HDMI CEC)”

This unit supports Philips EasyLink, which enables your TV (limited to PHILIPS brand EasyLink TV) to act in conjunction with this unit, or vice versa. Compliant TV must be connected to the HDMI OUT jack.

When “EasyLink (HDMI CEC)” setting is set to “On”, functions listed below will be available.

One Touch Play

When the operations with following buttons of the remote control of this unit are performed, the TV will automatically be turned on and switched to the appropriate input channel.

Buttons for one touch play:

-[B (play)], [S(previous)], [T(next)],

[the Number buttons], [ (home)], or [INFO ]

-[TOP MENU], or [DISC MENU / POP-UP MENU] (when a disc is inserted in the unit)

Standby

When you press and hold [Q(standby/on)] for 2 seconds, it turns off the power of the TV first and then turns off the power of this unit also.

System Information

Get & Set Menu Language

The unit recognizes the OSD language set for the TV and automatically sets the same language as the player menu language (OSD menu language) for this unit. Refer to the “Player Menu” on page 45 for available languages.

•This feature is available only when “Auto” is selected in the “Player Menu” in the settings menu.

Software Upgrade

home A “Settings” A “AdvancedSetup” A “Others” A “SoftwareUpgrade”

Philips continuously tries to improve its products and we strongly recommend that you update the software when updates are available. New software can be downloaded from our website at www.philips.com using the type number of your Blu-ray Disc Player (e.g. BDP7320) to find information.

Disc Upgrade

You can upgrade the software by using disc.

1)Follow steps 1) to 2) in “Connection Test” on page 58.

2)Use [K / L] to select “Others”, then press [OK].

3)Use [K / L] to select “Software Upgrade”, then press [OK].

4)Use [K / L] to select “Disc Upgrade”, then press [OK].

5)Use [K / L] to select “Yes”, then press [OK].

6)Disc tray will open automatically.

•Insert the disc for software upgrade and then press [A (open/close)].

7)After completing loading disc, confirmation message will appear. Use [s / B] to select “Yes” and press [OK] to start upgrading.

• It may take a while to complete the upgrading.

8)After the disc upgrade finishes, this unit will restart and open the disc tray automatically. Remove the disc.

Note

•Please visit www.philips.com to download the latest firmware version.

•Please do not unplug the AC power cord while executing the “Disc Upgrade”.

•All settings will remain the same even if you upgrade the firmware version.

•The version of Netflix will also be upgraded if newer version of Netflix is available when upgrading the firmware.

Network Upgrade

You can upgrade the software by connecting the unit to the Internet.

1)Follow steps 1) to 2) in “Connection Test” on page 58.

2)Use [K / L] to select “Others”, then press [OK].

3)Use [K / L] to select “Software Upgrade”, then press [OK].

4)Use [K / L] to select “Network Upgrade”, then press [OK].

5)Use [K / L] to select “Yes”, then press [OK].

•This unit will then start checking for the latest firmware version.

6)Confirmation message will appear.

Use [s / B] to select “Yes”, then press [OK].

•The unit will start downloading the latest firmware version.

7)When the download completes, confirmation message will appear. Press [OK].

•The unit will start upgrading the firmware version.

•It may take a while to complete the upgrading.

8)After upgrading finishes, this unit will restart and open the disc tray automatically.

Note

•In order to upgrade the software via the Internet, you must connect the unit to the Internet and set up necessary settings.

•For the network connection, refer to “Connection to the Network” on page 21.

•For the network setup, refer to “Network Connection” on page 58.

•Please do not unplug the AC power cord, LAN cable or USB wireless LAN adapter while executing the “Network Upgrade”.

•All settings will remain the same even if you upgrade the software version.

•The disc tray will open automatically after upgrading finishes. This is not a malfunction.

•The version of Netflix will also be upgraded if newer version of Netflix is available when upgrading the firmware.

EN

Others Setup Function Playback Setup Basic Connections Introduction

EN 63