SETUPS

7)Following screen will appear. Use [s / B] to select "Yes", then press [OK] to go to “Advanced Settings”.

•For further operation, refer to “Advanced Settings” on page 62.

•To go back to the home menu, press [ (home)].

Network Connection

Wireless router settings are incomplete.

Please use "Advanced Settings" to complete your setup.

Yes No

Note

•For a wireless network with authentication setting, key icon appears to the right hand of the wireless network name (SSID).

•Signal icon shows the strength of the signal.

•WEP/WPA key appears as asterisks on the confirmation screen.

•The supplied USB wireless LAN adaptor supports following specifications.

- Wifi standards

: IEEE 802.11 b/g/n

- Frequency spectrum

: 2.4GHz

- Security protocol

: WEP / WPA / WPA2

Manually enter your SSID

Set up the connection to the wireless router manually by entering the wireless network name (SSID).

1)Follow steps 1) to 3) in “Find wireless network” on pages 61-62.

2)Use [K / L] to select “Manually enter your SSID”, then press [OK].

•Wireless Router Name (SSID) entry screen will appear. Enter the wireless network name (SSID) using cursor buttons, number buttons and color key, then press [YELLOW].

Manually enter your SSID

Wireless Router Name (SSID)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

1

2

3

4

5

6

 

7

8

9

0

 

 

 

 

a

b

c

d

e

f

 

g

h

i

j

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

k

l

m

n

o

p

 

q

r

s

t

 

 

 

 

u

v

w

x

y

z

.

-

_

OK

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Clear

 

 

 

All Clear

 

 

 

a/A/@

OK

3)Follow steps 6) to 7) in “Find wireless network” on pages 61-62.

Wireless Router Status

You can check the current status of “Wireless Router” setting.

1)Follow steps 1) to 3) in “Find wireless network” on pages 61-62.

2)Use [K / L] to select “Wireless Router Status”, then press [OK].

•The list of current wireless router setting will be displayed.

3)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Advanced Settings

After you set up the “Wireless Router” setting, set the network setting to “Standard” (wireless) or “Manual”(wireless).

Standard (wireless)

To set the network setting to “Standard”(wireless), follow the following procedure. For details of this setting, refer to “Standard (Wired)” on page 58.

•If you select “Yes” in step 7) of “Find wireless network” on pages 61-62,skip to step 3).

1)Follow steps 1) to 2) in “Find wireless network” on pages 61-62.

2)Use [K / L] to select “Advanced Settings”, then press [OK].

3)Use [K / L] to select “Standard”, then press [OK].

Manual (wireless)

To set the network setting to “Manual”(wireless), follow the following procedure.

•If you select “Yes” in step 7) of “Find wireless network” on pages 61-62,skip to step 3).

1)Follow steps 1) to 2) in “Find wireless network” on pages 61-62.

2)Use [K / L] to select “Advanced Settings”, then press [OK].

3)Use [K / L] to select “Manual”, then press [OK].

• For details of each setting, refer to following pages.

“IP Address Setting” / “DNS Setting”:

Refer to “IP Address Setting / DNS Setting” on page 59.

“Proxy Setting”:

Refer to “Proxy Setting” on page 60.

“BD-Live Setting”:

Refer to “BD-Live Setting” on page 61.

“Network Status”:

Refer to “Network Status” on page 61.

Note

•You cannot select “Advanced Settings” if “Wireless Router” setting is not completed.

Disable

Deactivate all the network connection and settings.

1)Follow steps 1) to 2) in “Standard (Wired)” on page 58.

2)Use [K / L] to select “Disable”, then press [OK].

3)Use [K / L] to select “Yes”, then press [OK].

4)Press [BACK U] to go back to the previous screen, or press [ (home)] to go back to the home menu.

Note

•The network connection can be reactivated by setting the network connection to “Enable (Wired)” or “Enable (Wireless)”.

62 EN