Philips BDP7320/F7, BDP7320/F8, BDP5010 manual 47

LIST OF SETTINGS

Category		Menus / Options	Description
Audio	Night Mode	Auto	Compresses range between soft and
		On	loud sounds.
		Off	“Auto”:
			Night Mode will be activated
			automatically when Dolby TrueHD
			audio is played back.
			“On”:
			Activates the Night Mode.
			“Off”:
			Deactivates the Night Mode.
	Down Sampling	On	Sets the sampling rate for outputting
		Off	PCM audio from the digital output
			(coaxial).
			“On”:
			Over 96 kHz PCM audio will be down
			sampled at 48 kHz.
			“Off”:
			For BD or DVD recorded in LPCM
			without copyright protection,
			2-channel audio signals up to 96 kHz
			are output as LPCM signals.
	Virtual Surround	On	Select “On” to enjoy stereophonic
		Off	virtual space through your existing 2
			channel stereo system during
			playback of BD-video or DVD-video.
Setup	Blu-ray Disc Audio	Mix Audio Output	“Mix Audio Output”:
Advanced
		Primary Audio Only	The audio for the secondary video and
			the interactive application will be
			output together with the audio for the
			primary video.
			“Primary Audio Only”:
			Only audio for the primary video will
			be output.
			When playing back a BD-video which
			only contains primary audio, the
			audio output will be the same case as
			“Primary Audio Only” even if the “Blu-
			ray Disc Audio” is set to “Mix Audio
			Output”.
	HDMI Audio	HDMI Normal	Sets the audio format for sound
	• This feature is	PCM	output from the HDMI OUT jack.
	available only when	Off
	the display device is
	connected by an
	HDMI cable.

•Refer to page 53 for more information.

Digital Out	Bitstream	Sets the audio format for the sound
• When HDMI cable is	PCM	output from the DIGITAL OUT
connected, make		(COAXIAL) jack.
sure “HDMI Audio”
setting is set to “Off”
to change the
“Digital Out”
setting.
• Refer to page 55 for
more information.

EN

Others Setup Function Playback Setup Basic Connections Introduction

EN 47