You can adjust the black level setting to make the black parts of the pictures as bright as you prefer. You can select “On” or “Off”.
1.During playback, press [OPTION] to display the play menu.
2.Use [K / L] to select “Black Level”, then press [OK].
3.Use [K / L] to select your desired setting.
e.g.)
Black Level | On |
|
|
“On” : Makes the dark parts blacker with additional contrast and brightness.
“Off” : Shows the original picture as recorded.
4. Press [BACK U] to exit.
DNote
•The setting will remain the same even if the unit is switched to standby mode.
•“Black Level” is not effective under the following conditions.
- When the picture is output from HDMI OUT jack.
8.15. Noise ReductionReduces the noise of the playback picture.
1.During playback, press [OPTION] to display the play menu.
2.Use [K / L] to select “Noise Reduction”, then press [OK].
3.Use [K / L] to select your desired setting.
e.g.)
Noise Reduction | Off |
|
|
“On” : Activates noise reduction.
“Off” : Deactivates noise reduction.
4. Press [BACK U] to exit.
DNote
•The setting will remain the same even if the unit is switched to standby mode.
EN
You can enjoy stereophonic virtual space through your existing 2 channel stereo system.
1.During playback, press [OPTION] to display the play menu.
2.Use [K / L] to select “Virtual Surround”, then press [OK].
3.Use [K / L] to select your desired setting.
e.g.)
Virtual Surround | Off |
|
|
“On” : Activates surround effect.
“Off” : Deactivates surround effect.
4. Press [BACK U] to exit.
DNote
•Set the virtual surround setting to “Off” or lower the volume if the sound is distorted.
•For the virtual surround, audio signal will always be
EN - 35